Name	Description	Category
Fluke 771 Milliamp Process Clamp Meter	Measure mA signals for PLC and control system analog I/O Measure 4 to 20 mA output signals from transmitters without breaking the loop Best in class 0.2 % accuracy Resolution and sensitivity to 0.01 mA Hold function captures and displays changing measurements Dual backlit display with both mA measurement and percent of 4 to 20 mA span Measurement Spotlight illuminates hard to see wires in dark enclosures Detachable clamp with extension cable for measurements in tight locations Measure 10 to 50 mA signals in older control systems using the 99.9 mA range Automatic power off after 15 minutes and 2 minute automatic off for backlight and spotlight	Calibrators
Fluke 7526A Precision Process Calibrator	Sources and measures dc voltage, current, resistance, RTDs and thermocouples Precision pressure measurement using Fluke 700 or 525A-P series pressure modules Includes 24 V dc transmitter loop power supply Measures 4-20 mA loop current Includes automated switch-test function Accepts ITS-90 coefficients for accurate SPRT measurements Compatible with MET/CAL Calibration Software	Calibrators
Fluke 753 Handheld Multi-Function Process Calibrator	Multi-Function Calibrate temperature, pressure, voltage, current, resistance, and frequency Records and documents results Supports ISO-9000 or regulatory standards by capturing calibration results The USB interface lets users transfer the results to a PC Supports popular instrumentation management SW: The 753 works with the Fluke DPCTrack 2 software, and with popular programs from Honeywell Meridium, Emerson, Cornerstone, Yokogawa, Prime Technologies, Intergraph and others Three operating modes: Measure, Source, or simultaneous Measure/Source Bright, white display Rugged and reliable For a HART compatible Calibrator, Please Check the 754 Process Calibrator w/ HART Calibration	Calibrators
Fluke 726 Precision Multifunction Process Calibrator	More precise measurement and calibration source performance, accuracies of 0.01% Transmitter error% calculation, interpret calibration results without a calculator Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis Frequency totalizer and frequency pulse train source mode for enhanced flow meter testing HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation Integrated pressure switch test allows you to capture the set, reset and deadband of a switch Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement New voltage input protection design for improved reliability Two separate channels; measure, source and view process signals simultaneously Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters Measure or source pressure using any of 29 Fluke 700Pxx Pressure Modules Source mA with simultaneous pressure measurement to conduct valve and I/P tests Perform fast linearity...	Calibrators
Fluke 725EX Multifunction Process Calibrator	Support flow meter testing with frequency and CPM functions Perform fast linearity tests with auto- step and auto-ramp features Power transmitters during test using loop supply with simultaneous mA measurement Store frequently used test setups for later use Backlight lets you work in poor light Large battery capacity of four AA cells Battery door for easy changes Also available Fluke 725EX Intrinsically safe model	Calibrators
Fluke 725 Multifunction Process Calibrator	Support flow meter testing with frequency and CPM functions Perform fast linearity tests with auto- step and auto-ramp features Power transmitters during test using loop supply with simultaneous mA measurement Store frequently used test setups for later use Backlight lets you work in poor light Large battery capacity of four AA cells Battery door for easy changes Also available Fluke 725EX Intrinsically safe model	Calibrators
Fluke 724 Temperature Calibrator	Easy to read dual display lets you view input and output simultaneously Measure RTDs, thermocouples, ohms, and volts to test sensors and transmitters Source/simulate thermocouples, RTDs, volts, and ohms to calibrate transmitters Perform fast linearity tests with 25% and 100% steps Execute remote tests with auto step and auto ramp Power transmitters during test using loop power supply with simultaneous mA measurement Store frequently-used test setups for later use Compact, streamlined shape makes it easy to carry Rugged, reliable design stands up to field use Backlight lets you work in poor light Large battery capacity of four AA cells Battery door for easy changes	Calibrators
Fluke 721 Dual Precision Pressure Calibrator	Two isolated, stainless steel, pressure sensors with 0.025% F.S. accuracy 14 available pressure range configurations standard Temperature-compensation ensures accuracy in field applications External pressure module connection supports all pressure modules (29 ranges) for even more measurement capability Pt100 RTD input for temperature measurement, accurate to 0.1°C (0.2°F) Requires 720RTD probe sold separately as an accessory Measure 4-20 mA signals Internal 24 V Loop Power Supply can power a transmitter under test Measure up to 30 V DC Large graphic style LCD with backlight can be configured to display up to 3 inputs simultaneously (i.e. pressure 1, pressure 2, and RTD or any combination of inputs) Ideal for gas flow calibration (custody transfer) applications Pressure displayed in the user’s choice of 19 engineering units Switch test on both Pressure inputs, or external pressure module Operating mode layers support simple measurements to complex applications Up to five frequently used setups can be stored; last setup automatically recalled on power-up % Error and damping functions	Calibrators